4-in 1 Wireless Remote Control Duplicator 433MHz Remote Control Key Clone Copy

Description: Universal Wireless RF Remote Control Copy Code 433 MHz Clone Key Fob ControllerFeatures: ✔️ Premium Quality Material: The 433mhz remote control is made of plastic material, which has the characteristics of anti-rust, wear-resistant, anti-rust, non-fading, not easy to break, and Long-lasting in use. ✔️ Functions: The easy to use 4 channel remote control system with anti-theft/one-button anti-theft function can help you control gadgets, cars, houses and garages. Clone up to 4 remote signals from 4 different remotes! ✔️ Advantages: This is a fixed frequency remote cloner (433mhz) for copying 99.99% common fixed and learning code remote controls.The wireless remote control can easily pair with remote originals. ✔️ Application: This universal cloning remote control is suitable for remote control electric retractable doors, elevators, remote control barrier barriers, remote control rolling shutter doors, garage doors, sliding doors, remote control LED lights, remote control fireworks igniters, remote control bus doors, anti-theft alarms, electric door alarms, MP3 motorcycle anti-theft alarms, etc. How To Copy: 1️⃣ Clear code and restore Press and hold the two buttons above at the same time, make sure that the LED flashes for a while and then goes out and does not let go. After 2 seconds, the LED light starts flashing, which indicates that the code has been cleared. Press and hold the two buttons below at the same time, the LED light starts to flash after 3 seconds, which indicates that the code has been restored to the code that was cleared last time. 2️⃣ Copy Take the original remote control in the left hand, and our self-test remote control in the right hand. The two remote controls are as close as possible. Press the corresponding button keys of the two remote controls at the same time, and the LED lights will keep flashing, which indicates that the code of the button keys of the original remote control has been learned by our self-test remote control. The other 3 button keys also operate in the same way. 3️⃣ Recovery When you accidentally clear the code of the self-copying remote control, you can press the following two buttons at the same time, the LED light will light up after 3 seconds, and then flash quickly, which indicates that the code of the self-copying remote control has been restored. Note: Before using our self-copying remote control to copy, please be sure to clear the existing code of the self-copying remote control. The following is the method to test whether the existing code of the self-copying remote control has been successfully cleared: Note: The flashing speed of the LED is that when you finish the clearing action, you can press any key of the sub-copy, if the LED flashes once immediately and then goes out, it means that the sub-copy code has been cleared. It is determined by the launch oscillation resistance of the remote control! Can copy chips: 2260 (all manufacturers), 2262 (all manufacturers), PT2264 (all manufacturers), 5326 (all manufacturers), 527 (all manufacturers), 1527 (all manufacturers), 2240 (all manufacturers) HT6026, HT6012, HT6014, HT600, HT680, HT6010, HT6207, HT640, HT6P12E, HT6P20D, 12L-4SC, PT2292, 12L4SC, SC5262, PLC168, NF9420116, UM3750AM, SMC918, SMC00814165211, HCS101, HCS200, HCS201, HCS300, HCS301 (partial code) Note:Only suitable for 433MHz frequency (depending on the motherboard), not suitable for other frequencies. Package Includes: 1/2/5/10/20/30/40/50/80/100x 433MHz Remote Control1/2/5/10/20/30/40/50/80/100x Lock Buckle

Price: 6.68 USD

Location: Walnut, California

End Time: 2024-08-29T08:21:09.000Z

Shipping Cost: 0 USD