Description: This is a slant battery holder that will accept a smaller 3s lipo battery to convert your Futaba radio to LiPo. All you have to do is solder a wire harness to two washers, drill two holes through the solid top portion and bolt everything together. The inner dimension for the battery measures approximately 15.5mm x 41.5mm and the PHB3S45030CJST or something like it would work wellThe battery can be 15mm thick, 41mm wide, and around 96mm longI suggest using either M3 or a 4-40 screw with a flat head, no button head.Be aware that you have to measure the distance between the holes from the original holder, it may however be precise enough to center them in the middle of the top outer circle portions. Assembly Required, requires additional parts for completion Original Futaba Radio Components shown for reference only FUTABA MAGNUM/MEGATECH JUNIOR LIPO BATTERY HOLDER by fwdesign Thingiverse Thing: 3825538
Price: 13.69 USD
Location: Little York, Illinois
End Time: 2024-11-17T22:53:39.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Chemical Composition: LiPo
Number of Cells (S): 3s
Brand: DNA
