3D Printer Filament Dryer Box, 3D Filament Storages, Keeping Filaments Dry duri

Description: Large Storage Volume -Filament Dry Box Inner Size: 9.29*6.49*9.13 inch. Comgrow dryer box can store 2 rolls of 1kg spools, compatible with PLA PETG ABS SILK filament. Works perfectly with all standard filament diameters 1.75mm/2.85mm.Setting Notes - Set the temperature and duration after turning on the filament dehydrator. The machine will work only when the work state is displayed on the screen. If the work mode is not displayed, the motherboard will automatically shut down after 3 minutes. If you have any unsolvable problems with the COMGROW filament dryer box, please feel free to , our after-sales technical team will provide you with detailed solutions within 24 hours.Filament Dryer and Remove Moisture - Comgrow 3d printer filament dryer box is designed to keep filament dry and remove moisture from kinds of filaments. Internal heating during printing provides a dry storage environment for 3D printer filaments and keeps the filament dry. Avoid entanglement, clogging, poor adhesion, and layer migration caused by the dampness of the printing wire. (Note: Only used for the drying of 3D printer Filament)Real-time Monitoring of Temperature and Humidity - Adjustable temperature range 40°~ 50 °C, setting time from 6 hours to 12 hours. A 2-inch LCD screen and touch buttons make it easy to operate, it is more comprehensive and clear of the information display. Press the power button to start, and hold the function button(M) to change the dry time and the temperature setting.Great Sealed Filament Dry Box -The outlet structure adopts a silicone cable sheath and Teflon tube, the outlet is smooth and can be covered with a plug when not in use. The upper cover has a snap button structure, and the sealing performance is good.How to set the filament - Place the filament into the filament outlet. Please note that the direction is placed counterclockwise so that the pulley at the bottom can feed better. Product Description Large Storage Comgrow Dryer Box can store 2 rolls of filaments with a width of less than 70mm at the same time or 1 roll of filaments with a width of less than 150mm. Wide Compatibility Comgrow Dryer Box Works perfectly with all standard filament diameters 1.75mm/2.85mm. Adjustable Function 3D Printer Filament Dryer displays the humidity and temperature in the dry box in real time. Setting temperature 40°, 45°, 50°C and setting time from 6 hours to 12 hours. Filament Dryer and Remove Moisture Comgrow Dry Box is designed to keep filament dry and remove moisture from kinds of filaments. Internal heating during printing provides a dry storage environment for 3D printer filaments, keeps the filament dry. Filament Holder Please put the filament rolls inside in this direction to make the filament goes out more smoothly. Sealed storage The outlet is smooth and can be covered with a plug when not in use. The upper cover has a snap button structure, and the sealing performance is good.

Price: 74.99 USD

Location: Ridgewood, New York

End Time: 2024-08-08T07:18:13.000Z

Shipping Cost: 0 USD