Description: Fits '91-later units with factory-style sleeve. Can be retrofit to '89-91 units See instructions for details on the Sonnax websiteRETROFIT WILL NOT BE PLUG AND PLAY READ THE SONNAX INSTRUCTIONS Boost Valve Boost Sleeve Factory style, no O-ringsBalance Plug with O-Ring Fits '91-later units with factory-style sleeve. Can be retrofit to '89-91 units. See instructions for details. Common problems in vehicles with a 4L80-E and 4L85-E transmissions are uncontrollable line rise (upward of 500-600 psi), high line pressure in reverse, buzzing noise, broken direct clutch drums and/or broken cases. These problems are usually caused by reverse boost oil that enters the torque signal circuit due to a wear-created cross leak at the sleeve. High line pressure and buzz is created by oil leakage past the aluminum balance plug. The Sonnax boost vavle kit 34200-03K eliminates these problems. Hardened steel boost valve with over 20% wider spools to provide better durability and increased sealing contact area.Boost valve spools have annular grooves to reduce side loading that causes wear.Valve and sleeve are manufactured to close tolerances to restore proper clearance and hydraulic integrity.Kit includes a replacement aluminum balance oil plug with an O-ring to ensure proper sealing and adequate back pressure on the pressure regulator valve.NOTE: If you detect leakage between the sleeve and pump bore, use 34200-01K, which includes an O-ringed sleeve to compensate for pump bore wear and prevent pump scrappage.
Price: 23.91 USD
Location: El Paso, Texas
End Time: 2024-08-26T19:08:22.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Returns Accepted: ReturnsNotAccepted
Manufacturer Part Number: 34200-03K
Brand: SONNAX
