3/16 in. Double Flaring Tool (CP21110-316)

Description: 3/16 in. Double Flaring Tool (CP21110-316) Get the job done in half the time: this compact and portable Double Flaring Tool lets you easily create high quality 45-degree SAE double flares on 3/16 in. tubing such as brake linesWorks flawlessly with 3/16 in. non-stainless steel, nickel, and copper tubingCompact design lets you create perfect double flares both off vehicle and on vehicle, even in tight spotsDetachable die lets you also use with a bench viseAll-in-one tool. All you need is a 10 mm and a 17 mm wrench to work with the tool Step-By-StepStep 1: Loosen Locking ScrewsLoosen the (2) 10 mm locking screws to allow tubing to be inserted into the tool.Step 2: Flush Tubing with Positioning BoltInsert tubing through the small opening of the tool. Tighten locking screws lightly. Insert the positioning bolt into the large threaded opening of the tool and tighten. Slide the tubing inward until flush with positioning bolt.Step 3: Tighten Locking ScrewsWith the tubing positioned flush against the positioning bolt, tighten the locking screws to firmly secure the tubing. Unscrew and remove the position bolt.Step 4: Create Bubble FlareStarts with the OP1 end. Lubricate the OP1 end of the punch with the included die lubricant. Insert the OP1 end into the large threaded opening of the tool. Tighten the punch with a 17mm wrench. The OP1 punch then makes a bubble flare. Unscrew and remove the punch.Step 5: Create Double FlareNow, lubricate the OP2 end of the punch (opposite of the OP1 end) with the lubricant. Insert the OP2 end into the large threaded opening of the tool. Tighten the punch with a 17mm wrench to complete the double flare.Step 6: Unscrew and Remove the PunchUnscrew and remove the punch. Loosen the locking screws to retrieve the tubing from the tool. The 45 degree double flare is now complete.

Price: 46.99 USD

Location: Pompano Beach, Florida

End Time: 2024-11-10T10:20:21.000Z

Shipping Cost: 0 USD