3000W MPPT Hybrid Charge Controller 1KW Wind 2KW Solar Turbine Boost Regulator

Description: Rated wind power 600W/12V,800W/24V,1000W/48V Rated PV power 1000W/12V,1500W/24V,2000W/48V Product Introduction This kind of wind & solar hybrid charge controller is special designed for small off-grid wind generation and solar hybrid system. Appearance is elegant, operations are easy. It also makes the course of which wind generator and solar panels charge to batteries safely and efficiently. Functions and Features Wind generator MPPT boost charging function,improved charge efficiency . External dump load resistant to strong wind,work more stable . Solar MPPT charge，Solar intelligent disconnect charging，high efficiency charge. Bluetooth function can monitor the system information by the app on the app on the phone(Only for Android). Dual power supply function: Battery + solar power supply. LCD displays parameters such as voltage and current of wind, solar and load .Some parameters can be set by users. DC output with 3 output modes. Battery module type can be selected and parameters can be set； The controller has a built-in dust net, which is easy to replace and clean, ensuring the service life of the controller. The inner circuit board of the controller is sprayed with conformal coating to prevent dust, moisture and static electricity Reversed charging Protection of solar ：Such as at night, the voltage of the battery may be higher than solar panel. The controller protect the battery from charging the solar panel. Reverse polarity Protection of battery：When the battery polarity is reversed, the controller does not work and there is no display. The fuse protects the internal circuit.If the battery does not work properly after it is connected correctly, just need to replace the fuse . Battery open circuit Protection ：After long-term use, the battery may be Open-Circuit or poor connect. The controller can protect itself from damage.Check the connection regularly Over voltage Over current Over load voltage： When it’s strong wind or over voltage, the controller will automatically start braking function to protect the wind generator and battery. The controller will automatically cuts off the circuit when the output is over voltage. Lightning Protection ：Lightning protection refers to the last level of protection necessary for equipment. For lightning-prone areas, special lightning protection devices and other components of the multilevel lightning protection system are needed. It need additional payment If the user need this function. Introduction of the MPPT The Maximum Power Point Tracking (MPPT) system is an advanced charging technology that enables solar panels to output more power by adjusting the working state of electrical modules. Due to the non-linearity of a solar array,there is a maximum energy output point (maximum power point) on the curve of the array. Traditional solar charge controllers (switch charging technology and PWM charging technology) cannot charge batteries at this point, thus unable to obtain the maximum energy of solar panels. However, the solar energy charge controller equipped with the MPPT control technology can track the maximum power point of a solar array at any time in order to gain maximum energy for battery charging.Take the 12V system for example. The peak voltage of solar panels (Vpp) is around 17V and battery voltage is about 12V. Generally, when the solar charge controller is charging a battery, the voltage of solar panel is maintained at about 12V, indicating that the maximum power is not used. MPPT solar charge controllers provide a solution to that problem by constantly adjusting the input voltage and current of solar panels, therefore maximizing input power. Compared with conventional PWM solar charge controllers, MPPT solar charge controllers bring out the maximum power of solar panels and provide greater charging current. Generally speaking, MPPT solar charge controllers can improve energy utilization rate by 15% ~ 20% over PWM solar charge controllers.(Figure 1) Moreover, different environmental temperatures and light conditions lead to frequent changes of the maximum power point. Our MPPT solar charge controller can constantly adjust parameters according to different conditions so as to put the system near the maximum working point all the time. The whole process is completely automatic without any adjustment by users.(Figure 2) The figure is a schematic diagram of the principle of wind turbine MPPT charging. WIND+and WIND - are the DC input terminals of the generator after being rectified by the internal rectifier circuit of the controller. BAT+and BAT - are battery energy storage connection terminals. L1 is the MPPT power inductor, which is used to store energy during the MPPT charging process. D1 is a reverse isolation protection diode that can reduce the loss caused by the conduction of the switch. Q1 is a switching MOSFET, which is the core component of the MPPT circuit. It controls the operation of the MOSFET through a high-frequency PWM drive waveform, thereby adjusting the fan to the maximum power operation state. Due to the constant changes in the wind speed and direction of the natural wind, timely tracking and adjustment are required. According to the generator input signal sampled by the controller, the circuit adjusts the driving waveform of MOS tube Q1 in real time through MCU analysis and control and MPPT software algorithm, thereby achieving instant response and achieving MPPT charging effect The ordinary wind turbine charging controller can only be charged when the fan is large and the fan voltage is higher than the battery voltage. The MPPT controller of this product can not only meet this requirement, but also realize the breeze charging function by boosting the lower fan input voltage through the MPPT boost circuit when the wind force is low and the fan input voltage is lower than the battery voltage, and allowing the fan to operate at the maximum power point. Rated system voltage 12V、24V、48V、12/24 ATUO、24/48V AUTO（ONE OF FIVE） Rated wind power 600W/12V,800W/24V,1000W/48V Rated PV power 1000W/12V,1500W/24V,2000W/48V Charge way for Wind turbine Mppt boost &PWM Charge way for PV MPPT&PWM Max input voltage for wind 12/24V system：wind≤80V ；48V system：wind≤130V Max input voltage for solar 12/24V system：solar≤80V；48V system：solar≤130V Dump load way External dump load ，wind power ≤1KW with R1，wind power ≥1KW with R2 No-load Current (DC) ≤0.06A Controller power mode Battery or solar panel Communication Bluetooth（need to purchase） Output load working mode(Mode) Mode 1: Light-control on. Light-control off (3 modes adjustable) Display LCD display (clear and easy to understand ) Display content LCD display,Voltage, Percentage of battery power, Current, working mode of load, etc Protection Solar Reversed Charging protection，Battery open circuit protection、battery anti-reverse connection protection protection、Over current and over voltage auto brake protection、Over load protection,etc. Cooling mode Cooling fan and self-cooling Workingtemperature/ Relative humidity ﹣20~﹢55℃/35~85%RH (non-condensing) N W. 2.85Kg GW.(Controller+dumpload） 4.9Kg NW. For R1，R2 R1：0.95Kg 、R2：1.35Kg Size for Controller /Package Size 260*194*97.33mm / 390*320*155mm Dump load size ： R1：210*70*130mm、R2：200*90*150mm

Price: 246 USD

Location: Yiwu

End Time: 2025-02-06T07:01:23.000Z

Shipping Cost: 0 USD

Product Images

3000W MPPT Hybrid Charge Controller 1KW Wind 2KW Solar Turbine Boost Regulator

Item Specifics

Restocking Fee: No

Return shipping will be paid by: Buyer

All returns accepted: Returns Accepted

Item must be returned within: 30 Days

Refund will be given as: Money back or replacement (buyer's choice)

Current Output: 30-39 A

System Configuration: Hybrid

Power Source: Wind Solar Hybrid

Size: 260*194*97.33mm

Wattage: 2500-2999 W

MPN: Do Not Apply

Item Length: 260mm

Current Type: AC

Voltage: 41-50 V

Features: All Daylight Conditions, Automatic Voltage Detection, Brushless Motor, Corrosion Resistant, Daylight Operation, Fixed Guyed, Flexible, Indicator Light, LCD Display, PC Display, Portable

Protection Properties: Freeze Protection, Low Voltage Protection, Overload Protection, Overspeed Protection

Maximum Input Power: Greater Than 2000 W

Maximum Input Voltage: 41-50 V

Inverter Technology: Hybrid

Color: White

Current Rating: 21-30 A

Material: Aluminum alloy

Brand: Bayoung

Type: Wind Solar Hybrid Controller

Recommended Environment: Outdoor

Charging Mode: MPPT (Maximum Power Point Tracking)

Resistance Properties: Abrasion Resistant, Acid Resistant, Chemical Resistant, Childproof, Child Resistant, Corrosion Resistant, Dustproof, Dust Resistant, Fade Resistant

Country/Region of Manufacture: China

Application: Agriculture/Farming, Automotive, Back-up Power, Camping/Hiking, Commercial, Electronics, Home/Garden, Irrigation, Marine

Power: Greater Than 2000 W

Display: LCD