3 Sets Flat & V Belts Fits Self Propelled Hoover Windtunnel 38528034 38528035

Description: Three (3) Sets of Two New Replacement Belts to Fit Self propelled Hoover Windtunnel upright vacuum cleaners. Includes "V" Belt (38528-034) that goes from the pulley on the transmission to the brush-roll. and the FLAT belt (38528-035) that goes from the motor shaft to the transmission pulley. NOTE: The flat belt is a stretch belt that needs to be replaced at least once or twice a year. The "V" belt does not stretch but the inside grooves of the "V" will wear away (especially if the flat belt is slipping) Warning: Change your Vacuum Belts every 6 months. At least once a year. Also clean the hair and lint from around the ends of the brushroll or it will build up and damage the brushroll or the vacuum cleaner nozzle housing which is expensive to repair or replace. WHY do vacuum belts NEED Changed if they're not broken? You have to stretch a new belt to get it on your vacuum. Every day your belt looses elacsticity (think of a 2 inch rubber band that you stretch to 4 inches and leave it that way for a few months) Even if your vacuum cleaner is never used the belt is stretching and loosing elasticity. Every single day it doesn't work quite as well as the day before. It will still pick up hair and light dust but can't dislodge the heavy sandy, gritty soils to the surface of the carpet fibers to be sucked out of the fibers. After 6 months the brush-roll really starts to slow down. It may even stop spinning completely when the vacuum cleaner nozzle is lowered onto the carpet. If you have questions or you are unsure if these parts will fit your vacuum please email us thru Ebay Messaging.

Price: 24.97 USD

Location: Columbia City, Indiana

End Time: 2023-12-13T16:19:55.000Z

Shipping Cost: N/A USD