2X DENTAL SDI LUNA COMPOSITE Composite Restorative Material syringe

Description: DESCRIPTION:-Combining nano-hybrid and micro filler particle technology together with non-stick handling, the radiopaque light cured, condensable and low shrinkage composite, Luna offers polishability and strength on an unprecedented scale for anterior and posterior restorations alike.COMPOSITION:22.5% wt (39% vol.) multifunctional methacrylic ester77.5% wt (61% vol.) inorganic filler (40nm - 1.5 micron).INDICATIONS:Direct anterior/posterior restorations (Class I, II, III, IV, V)Core build upsIndirect inlays, onlays and veneersSplintingComposite and porcelain repairSandwich technique with glass ionomers. CONTRAINDICATIONS:Pulp cappingProduct may cause skin irritations to some people. In such cases, discontinue use and seek medical attentionDo not use in conjunction with any eugenol-containing materials.FEATURE:-Natural optical propertiesLuna contains the right balance of optical elements such as fl uorescence and translucency to produce a chameleon effect with the natural dentition without using a complicated multi-layering technique. The relationship between colours and translucency of Luna is carefully balanced out to cleverly change according to the thickness of the material used when restoring a tooth. Luna is the ideal composite for a busy dental offi ce looking for aesthetic results.Low shrinkageThe low shrinkage of Luna minimizes post-operative sensitivity and microleakage; an effective seal against microleakage decreases the potential for secondary caries development. Luna has low polymerization shrinkage as it utilizes longer resin chains with fewer monomer links.Compressive strengthThe high compressive strength of Luna enhances longevity of a composite by withstanding oral grinding forces. Luna’s optimum fi ller level maximizes strength.Non-stick handlingLuna’s non-stick handling is ideal for restoring anterior and posterior restorations. Its non-stick to placement instruments nature is perfect for gentle packing, contouring and easy sculpting.RadiopacityThe unique high level of strontium aluminosilicate fi ller in Luna makes it easy to detect on X-raysHigh filler levelContaining micro particles of strontium based glass and high loading, Luna can provide outstanding wear profi le for your patients. KEY FEATURE:- STORAGE AND HANDLING:Store at temperatures between 10° and 25°C (50°- 77°F)Use at room temperature between 20° and 25°C (68°- 77°F)Syringe system: when not in use replace the cap tightlyPRECAUTIONS:Avoid prolonged contact of etchant, adhesive and composite with the skin or oral tissue, as it may cause inflammation of the oral tissues or skin sensitizationFor professional use onlyKeep out of reach of childrenDo not take internallyDo not use after expiry dateDo not expose material to direct lightCaution: Federal Law restricts this device to sale by or on the order of a dentistSDS available at www.sdi.com.au or contact your regional representative.INSTRUCTIONS TO USE:1. Clean and isolate tooth. Rubber dam is the preferred mode of isolation2. Prepare a conservative cavity, employing standard techniques3. Use a calcium hydroxide liner and appropriate glass ionomer cement liner to protect deep cavity preparations in close proximity to the pulp4. Select composite shade by matching with a clean and moist tooth using the SDI composite shade guide5. Apply bonding system according to manufacturer’s instructions, or apply Stae single component dentin/ enamel adhesive as follows:a) Thoroughly dry the bonding surfaces of the tooth with dry, oil-free air.b) Etch with Super Etch 37% phosphoric acid (SDI Limited) for at least 20 seconds. NOTE: Enamel subjected to fluoridation should be etched for 90 to 120 seconds.IMPORTANT: If using an etch syringe, ensure that the dispensing tip hub is firmly attached to the syringe by twisting the hub securely onto the syringe. On first usage or after prolonged storage, extrude a small amount onto a mixing pad for familiarity with the etchant’s viscosity and rate of extrusionc) Wash thoroughly with waterd) Remove excess water. Keep moist. Avoid contamination e.g. salivae) Apply Stae to saturate all internal surfacesf) Blow gently with dry, oil-free air to evaporate solvent. Leave surface glossyg) Light cure for 10 seconds6. Place composite in increments of 2mm or less. NOTE: If using the syringe system, after each use, turn the screw plunger anti-clockwise half a turn to release any built up pressure7. Light cure each increment for at least 10 seconds for light shades and at least 20 seconds for dark and/or opaque shades using a high powered LED light such as the Radii Plus (SDI Limited)8. Shape, polish and finish employing standard techniquesPACKAGE CONTAIN:-1 x 4g Syringe CUSTOM/IMPORT DUTIES : Import duties, taxes and charges are not included in the item price or the shipping charges. These charges are the buyer's responsibility. Please check with your local customs authority to determine these additional costs prior to bidding or buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up please do not confuse them for additional shipping charges. Disclaimer : The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.Disclaimer "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item."

Price: 69.99 USD

Location: Rupnagar, Punjab

End Time: 2025-02-02T06:28:31.000Z

Shipping Cost: 0 USD