2pcs ER16 M Type Collet Clamping Nut for CNC Milling Chuck Holder Black NEW

Description: Description Condition:100% Brand New & High Quality Size:As Picture Fitment:for ER collet milling CNC chuck holder. Specification: Model: ER16M Material: Carbon steel Feature: Hardened and precision ground. High strength and hardness. Durable in use. Mounting and Removing: 1.Place collet into the clamping nut at an angle and turn the nut slightly to engage with the extractor spiral in collet groove. And then push the collet evenly into the nut in the directions of the arrows. 2.The cutter / router bit may be fitted now and the assemblies tightened hard into the chuck body by using a collet wrench. 3.To remove the cutter / router bit, slacken and undo the nut until resistance is felt. Then, using a collet wrench, further undo the nut until the collet is released from the chuck body. Removal of the collet from the nut is the reverse of the mounting procedure. Please note: 1、Please don't tighten the nut down before insert the cutter / router bit. Or you will damage the collet. 2、You need to tighten the nut down, but not over-tighten. Or you will damage the collet. Package Include:2 x ER16M type Clamping Nut Be assured to buy it if you’ve confirmed the shape and size of the item with your original unit. What you see in the picture is what you will get. DVFBD7335 Payment 1.Paypal, Visa, and MasterCard are the accepted forms of payment. Please use the eBay checkout system when paying for your order. Immediate payment is required for all orders. 2.Please make sure your address is correct before you pay. 3.Please be kind to contact us to cancel the order if you can’t pay in time or don’t want the item any more. Shipping It is shipping from USA. We process and dispatch your purchase within 3 business days after payment clearance. We sincerely remind that the shipping maybe delayed for unforeseeable reason, please contact us for any further assistance. All our items will be shipped to buyer's PayPal address, please confirm your address before you place an order. If you want to the change the address, please email us when you buy it.Otherwise we will not take responsibility for the package which has been sent out already. About Us We accept returns within 30 days. Please contact us first for authorization, so we may discuss a better solution. Buyer is responsible for return shipping fee. Refund will be issued as soon as return was received. Think carefully before leaving neutral/negative feedback. Please feel free to contact us via e-mail first should there be any problem with the item you received. Condition:100% Brand New & High Quality Size:As Picture Fitment:for ER collet milling CNC chuck holder. Specification: Model: ER16M Material: Carbon steel Feature: Hardened and precision ground. High strength and hardness. Durable in use. Mounting and Removing: 1.Place collet into the clamping nut at an angle and turn the nut slightly to engage with the extractor spiral in collet groove. And then push the collet evenly into the nut in the directions of the arrows. 2.The cutter / router bit may be fitted now and the assemblies tightened hard into the chuck body by using a collet wrench. 3.To remove the cutter / router bit, slacken and undo the nut until resistance is felt. Then, using a collet wrench, further undo the nut until the collet is released from the chuck body. Removal of the collet from the nut is the reverse of the mounting procedure. Please note: 1、Please don't tighten the nut down before insert the cutter / router bit. Or you will damage the collet. 2、You need to tighten the nut down, but not over-tighten. Or you will damage the collet. Package Include:2 x ER16M type Clamping Nut Be assured to buy it if you’ve confirmed the shape and size of the item with your original unit. What you see in the picture is what you will get. DVFBD7335

Price: 9.99 USD

Location: South El Monte, California

End Time: 2025-01-21T23:35:22.000Z

Shipping Cost: 0 USD