Description: **IF YOU REQUIRE SHIPPING TO ALASKA, OR HAWAII CONTACT ME FIRST****PICTURES MAY SHOW FITTINGS OR WIRING NOT INCLUDED IN THE AUCTION LISTING, PLEASE READ BELOW CAREFULLY** FITS:2003-2009 VW Golf Mk5 (designed for R32)Pending fitment test on other VW PQ35 Platforms (i.e. Audi A3 Mk3, TT Mk2)1000 rwhp capable* boost referenced fuel system. Feed line enters aftermarket rail and regulator is direct mounted to passenger side of fuel rail.1000 whp fuel systemRequires aftermarket fuel railINCLUDESVW Mk5 Dual Triple ModuleFCV CheckvalveF2i Fuel Pressure Regulator88mm Inline Fuel FilterAll fittings, hose, and hardware required for typical fuel line plumbing-30 feet of fuel line (your choice)-Qty 4, straight compression billet hose ends-Qty 1, 90 degree compression billet hose end-Qty 1, 180 degree compression billet hose end-Qty 3, billet low profile 90 degree AN to o-ring fittings-Qty 1, straight AN to o-ring fittings-Qty 12, hose straps with stainless mounting screws*supported power level depends on fuel pump configuration, engine efficiency, and fuel type I am not an expert on all models of fuel systems but will help as much as I can, as always talk to your tuner for advice and their recommendations on pump size etc. The following options are available, if you need the configuration changed, please contact us for a custom auction: Fuels (required) Gasoline / race gas (<15% ethanol) Ethanol blends, gasoline, race gasPrimary Fuel Pump (required) Walbro GSS342 G3 [ Included ] Walbro GSS352 G3 [ +$10.00 ] TI Auto F90000267 [ +$25.00 ] TI Auto F90000274 [ +$30.00 ] TI Auto F90000285 [ +$65.00 ]Secondary Fuel Pump(s) (required) 2 x Walbro GSS342 G3 [ Included ] 2 x Walbro GSS352 G3 [ +$20.00 ] 2 x TI Auto F90000267 [ +$50.00 ] 2 x TI Auto F90000285 [ +$130.00 ]Electrical Upgrade (required) None (I have my own fuses, wiring, relays, etc) Pump power pigtails only [ +$25.00 ] FC2 Controller with wiring [ +$209.00 ] FC3 Staged Controller with wiring [ +$249.00 ] Circuit breaker upgrade [ +$10.00 ]Fuel Lines PTFE -8 Feed / Return FlexLP / RH235 -8 Feed / Return Upgrade to -10 Feed [ +$65.00 ]Filtration Media (required) Cellulose [ Included ] Microglass SSD [ +$19.00 ] Stainless Steel [ +$32.00 ]Fuel Filter Upgrades Upgrade to 128mm Filter [ +$30.00 ] Add billet mounting bracket [ +$45.00 ] Add filter monitoring gauge and fitting [ +$62.00 ]System Options 0-100 psi Fuel Pressure Gauge [ +$30.00 ] Honeywell Pressure Switch for FC3 [ +$65.00 ] Flex fuel sensor intercept fittings [ +$69.00 ] Boost / Vacuum Manifold Kit [ +$77.00 ]Tools Include 6mL tube of Loctite 567 [ +$9.00 ] Include black touch-up pen [ +$7.00 ] AN soft jaws and wrench set [ +$63.00 ]Notes:Fuels:Gasoline / race gas: choose if you are will only be running typical pump gas or race gasoline, such as MS109, C16, Q16, etc.Ethanol blends, gasoline, race gas: choose if you will be running a combination of gasoline, race gas, E85, E98, E85R, C85, etc.Methanol is not currently supported or recommended with our fuel systems. Fuel Pumps:Walbro GSS342 G3255lph best for gasoline-only cars when the secondary pump(s) are large enough to supply fuel for maximum load.Walbro GSS352 G3350lph gasoline-only pump, same physical size as GSS342 G3.TI Automotive F90000267430lph E85 rated. Recommended when maximum fuel pressure will not exceed 75 psi. Do not use with 274 secondary pump.TI Automotive F90000274430lph E85 rated. Recommended when maximum fuel pressure may exceed 75 psi (intermittently) Do not use with 267 secondary pump.TI Automotive F90000285470lph E85 rated. 10% more flow and 25% more heat than F90000274. Recommend 274 for primary use over this pump unless the extra capacity is required. DISCLAIMER: Due to the nature of performance applications, all products are sold without any expressed warranty or any implied warranty of merchantability or fitness for a particular purpose. The seller shall not, under any circumstances be liable for any special, incidental or consequential damages, including, but not limited to, damages or loss of other property or equipment, loss of profits or revenue, cost of purchased or replacement goods, or claims of customers of the the purchaser which may arise and/or result from the sale, installation or use of these parts. Any warranty would be at the complete discretion of the manufacturer. For more info and installation instructions please visit the manufacturer's website.
Price: 1595.95 USD
Location: Hubert, North Carolina
End Time: 2025-01-18T16:00:29.000Z
Shipping Cost: 19.95 USD
Product Images
Item Specifics
Returns Accepted: ReturnsNotAccepted
Brand: Fore Innovations
Non-Domestic Product: No
Custom Bundle: No
Manufacturer Part Number: 46-532
Surface Finish: Hard Anodized
Modified Item: No
