2000ml/min RQ-MA A series PEM electrolysis tank hydrogen generator hydrogen rich

Description: A series 150-2000ml PEM electrolysis tank hydrogen generator hydrogen rich water machine hydrogen generator electrolysis water to make hydrogen26A rated currentCompact, delicate and stable air volumeInstructions for useProduct design1. When designing hydrogen products, use a constant current power supply that matches the voltage and current parameters of the electrolyzer, otherwise it will cause damage to the electrolyzer or substandard performance;2. The height difference between the water tank outlet and the electrolyzer inlet should be greater than 10 centimeters when the product is designed, or equipped with a set of circulating water pumps, and there is no requirement for the height difference between the two when setting up the circulating water pump;3. Electrolytic cell operating efficiency and working temperature correlation is high, frequent low-temperature start-up will cause some damage to the electrolytic cell, for this reason in the design of the product should be given full consideration to the problem of the start-up temperature, the solution to this problem needs to be optimized in the design of the product, a built-in program to control the power supply when the power supply start-up power supply current output, the output current gradually step by step, and finally stabilized in the rated operating current (parameters with the relevant) The first is to control the current output of the power supply through the built-in program when the power supply starts, the output current rises gradually and finally stabilizes at the rated working current (the parameters match with the relevant models), and the working voltage does not exceed the rated voltage during the period; the second is to set up an automatic instantaneous heating module or a water tank warming module between the water outlet of the tank and the water inlet of the electrolysis tank to ensure that the temperature of the water flowing into the electrolysis tank is not lower than 25C;Instructions for useProduct design4. In order to ensure the long-term stable operation of the electrolysis tank, it is recommended to equip and set up ion exchange resin filtration device during product design, which can be set between the water outlet of water tank and the inlet of electrolysis tank to ensure that the water used for electrolysis meets the requirements of the use standard; 5. If the electrolysis tank reuses the circulating water coming out of the oxygen port, it is recommended to use it only after the treatment of ion exchange resin (the conductivity is <5uS/cm) and it is recommended to add the ion exchange It is recommended to add ion exchange resin cartridge;6. The internal space of the product design should be reasonably designed, especially there is enough space around the electrolyzer, as well as suitable runner design to ensure normal air flow to achieve good heat dissipation effect;7. The size of the water tank should correspond to the technical parameter table, and the level control and device should be set in the water tank to ensure that the water is kept above the lowest level (refer to the technical parameter table for the specific value).Instructions for useProduct assembly process1. In the process of product assembly, we should fully understand the characteristics of the working principle of the electrolyzer, and prevent the joints and pipe openings of the electrolyzer from being polluted by other substances, and the assembly workshop should have a certain degree of cleanliness;2. When connecting the circuit system, we should carefully identify the positive and negative poles of the electrolyzer to prevent the connection from being reversed, otherwise the electrolyzer will be burned;3. Piping connections need to be stable and reliable, with appropriate temperature and pressure resistance and hydrolysis resistance, to prevent aging or shedding leading to leakage; materials in contact with water must be corrosion-resistant, oxidation-resistant and high-temperature-resistant materials, the recommended use of Teflon material as a structural component or piping, the use of metal materials must be recommended the use of pure titanium material.4. The selection of electrical components should be strict to ensure safety and reliability. Adopt reasonable connection process to reduce unnecessary overheating. The connecting wires between the power supply and the electrolyzer should ensure the quality, and the connecting ends should be fastened and reliable, otherwise it will generate a large amount of heat, which is a potential safety hazard.Instructions for useUser conditions of use and common senseCustomers should prepare accurate and comprehensive product manuals to ensure that customers can use the product correctly and reasonably in accordance with the instructions for use; must use pure water/deionized water/secondary distilled water (conductivity <5uS/cm), it can be recommended to use Yibao pure water; must remind customers to pay attention to the water level, and prohibit the operation of the lack of water, to prevent electrolytic cell burned out.PEM electrolyzer is a device that requires specific conditions for normal operation, reasonable design, matching, process and use can greatly extend the service life of the device, high-quality hydrogen product life can reach 3-5 years.1.package included:1pc2.Warranty period: 120 days On Sep 14, 2024 at 02:41:48 PDT, seller added the following information:

Price: 1875 USD

Location: 深圳

End Time: 2025-01-10T09:56:30.000Z

Shipping Cost: 0 USD