2 Replacement Lids for Stainless Steel Tumbler Travel Cup

Description: Easy to open and close-switch sliding cover design, easy to use. The hole on the top of the cup can be used directly or with a straw. The sliding cover design prevents you from touching your nose while drinking water.Excellent compatibility-the lid can replace 30 ounces (the inner diameter of the cup is about 3.72 in) insulated stainless steel cups of any material, but it is not suitable for RTIC flat-bottomed cups! In order to avoid you to buy an inappropriate size lid, before buying Please measure the inner diameter and outer diameter of the cup, and then please refer to our fourth and fifth pictures. These two pictures are taken by our actual measurement. And check the details of our description.Splash-proof-The edge of the flat-bottomed cup lid is lined with a silicone gasket to prevent splashes and major spills when the cup is turned over. There is an air hole on the top of the slider, through the air ergonomics, which helps to reduce splashing. However, this cup lid cannot be guaranteed to be 100% leak-proof. Please check the two precautions described below before purchasing.High-quality materials-made of high-quality raw materials, can be used for a long time, BPA-free, easy to clean, and can be cleaned in a dishwasher.Quality Assurance-Buy our products, we will give quality assurance, if you have any questions or dissatisfaction with our products, you can contact us, we will do our best to serve you. Product Description Size:30oz Color:Clear Features: The closure can open and close for direct sipping or for a straw. Come with a black silicone o-ring around the base, which helps cover the cup tightly. Designed with an air hole on top of slider according airflow ergonomics which helps reducing splashing. The outside diameter size of the cup lid is shown in the picture - 3.91 IN. The inner diameter size of the cup lid is shown in the picture - 3.74 IN. Our cup lid inner diameter is 3.74 inches, as long as the cup mouth inner diameter of the cup is 3.7 inches - 3.74 inches are suitable. Other sizes are not recommended for purchase, NOTE！NOTE！NOTE!！ Please be sure to check whether the size of your cup is appropriate before you buy. Avoid buying an unsuitable cup lid. THE CORRECT WAY TO USE: THE CORRECT WAY TO USE: When we put the lid on the cup, it may seem as if it does not fit, as if the lid is a bit too big. In fact, this does not need to worry, we just need to press the lid down a little, the lid will fit tightly on the mouth of the cup, this is also a special part of our design, the edge of the lid is a circle of rubber ring, this can help the lid tightly hold the mouth of the cup, will not easily fall out. So as long as the mouth of the cup in 3.70-3.74 inches, are suitable. Note : 1，The liquid in the cup is very full, and the cup is tilted 90°, when placed sideways, a small amount of liquid in the cup will leak out from the air hole on the top of the slider. (Since our design is to help reduce splashing, we have designed an air hole on the top of the slider to achieve this purpose through air ergonomics.) So if you buy this lid, please do not put the cup filled with liquid Place it sideways. So as not to cause you some trouble. However, if the liquid in the cup is not full and the tilt angle is lower than 45°, the liquid will not leak out. 2，If the Inner diameter of your cup is 9.5cm/3.74 inch, Outer diameter is 10 cm/3.9 inches，it is just right to use our lid, and the lid will fit tightly on the mouth of the cup. If your size is different from ours, it is not recommended that you buy it. Hope you can buy a suitable cover for you.

Price: 11.77 USD

Location: Denver, Colorado

End Time: 2025-01-16T20:44:36.000Z

Shipping Cost: 0 USD