(2) Lamborghini Gallardo Dual Pump Fuel Modules Fore Innovations w/ Pumps

Description: **IF YOU REQUIRE SHIPPING TO ALASKA, OR HAWAII CONTACT ME FIRST****PICTURES MAY SHOW FITTINGS OR WIRING NOT INCLUDED IN THE AUCTION LISTING, PLEASE READ BELOW CAREFULLY, For Gallardo - Gallardo requires 2 fuel pump modules. This auction is priced with (2) Modules and GSS342 Pumps. If you need other items contact me and I can put together a listing just for you.SPECIFICATIONS:Feed/Return Ports: Female -8 o-ringPump Power Wires: 12 AWG stranded copper, two pairsUse in conjunction with a complete return style fuel system for 1500+ rwhp with dual fuel pumps (recommended to run one pump full time, then activate secondary pumps under load). Retains OE fuel level sender, EVAP functionality, and tank transfer, and filler neck.This component requires the use of external feed and return lines, external filtration (for injectors), external regulation, and an upgraded electrical system. Upgraded fuel rails and an inline check valve is recommended. Supplies port fuel injection and optional wet nitrous.See our complete fuel systems if the extra components are needed.E85 requires F90000267, F90000274 or F90000285 fuel pumps.This is part of a stand alone fuel system. Professional installation and a custom tune is required. Qualified installers must be able to interface to the OE harness and FPDM/FPCM (on certain models), understand proper component placement, hose routing, and deliver the vehicle with factory-like pump prime/on/off logic with no error codes. Fore Innovations will supply basic system schematics and detailed component level instructions, and can provide troubleshooting of the performance and function of our system and components.This fuel system generates substantially more heat and capacity than the original fuel system. The high powered fuel pumps make much more heat than the factory pump and the composite fuel tank construction acts as an insulator and stores heat. Additionally, the shape of the factory fuel tank limits the pickup capacity of this fuel system. The user (driver) must keep more fuel (than normal) in the tank at all times to minimize heat damage and ensure adequate fuel pickup.MAXIMUM FLEXIBILITY AND PERFORMANCEEasily outperforms single "race" fuel pump applications.Factory reliability in all operating conditions and very low pump noise.Fuel pump options to accommodate 700-1800 rwhpE85 and race fuel compatible (see pump manufacturer recommendations on fuel compatibility)BEST POSSIBLE VEHICLE INTEGRATIONNo permanent modifications necessary to vehicleHermetic wire pass through, absolutely no chance for fuel smells/leaksReuses OEM level sender for complete compatibility with factory electronicsRetains complete capacity of original fuel tank, even at low fuel levelsFAQCan I reuse my original fuel feed line?No, this product requires upgraded feed and return lines.Can I reuse my original pump wiring?No, since this product can provide much more fuel than the OEM fuel pump, upgraded fuel pump power wires must be used. We can assist you with your power requirements depending on your application.I have heard several cases where big single race fuel pumps stop working in high heat conditions. How does your product stack up? Does your product need a voltage controller?When purchased with our supplied fuel pumps, this product will operate with OEM reliability in any conditions on the planet. A voltage controller is not required for this product. I am not an expert on all models of fuel systems but will help as much as I can, as always talk to your tuner for advice and their recommendations on pump size etc. The following options are available: Fuels (required) Gasoline / race gas (<15% ethanol) Ethanol blends, gasoline, race gasPrimary Fuel Pump (required) Walbro GSS342 G3 [ Included ] Walbro GSS352 G3 [ +$10.00 ] TI Auto F90000267 [ +$25.00 ] TI Auto F90000285 [ +$65.00 ]Secondary Fuel Pump(s) (required) Walbro GSS342 G3 [ Included ] Walbro GSS352 G3 [ +$10.00 ] TI Auto F90000267 [ +$25.00 ] TI Auto F90000285 [ +$65.00 ]Feed Fitting None -6 AN Male 90° low profile [ +$29.00 ] -8 AN Male 90° low profile [ +$29.00 ] -10 AN Male 90° low profile [ +$29.00 ]Return Fitting None -6 AN Male 90° low profile [ +$29.00 ] -8 AN Male 90° low profile [ +$29.00 ] -10 AN Male 90° low profile [ +$29.00 ]Electrical Upgrade (required) None (I have my own fuses, wiring, relays, etc) Pump power pigtails only [ +$25.00 ] FC2 Controller with wiring [ +$209.00 ] FC3 Staged Controller with wiring [ +$249.00 ] Circuit breaker upgrade [ +$10.00 ]System Options Honeywell Pressure Switch for FC3 [ +$65.00 ] Notes:Fuels:Gasoline / race gas: choose if you are will only be running typical pump gas or race gasoline, such as MS109, C16, Q16, etc.Ethanol blends, gasoline, race gas: choose if you will be running a combination of gasoline, race gas, E85, E98, E85R, C85, etc.Methanol is not currently supported or recommended with our fuel systems. Fuel Pumps:Walbro GSS342 G3255lph best for gasoline-only cars when the secondary pump(s) are large enough to supply fuel for maximum load.Walbro GSS352 G3350lph gasoline-only pump, same physical size as GSS342 G3.TI Automotive F90000267430lph E85 rated. Recommended when maximum fuel pressure will not exceed 75 psi. Do not use with 274 secondary pump.TI Automotive F90000274430lph E85 rated. Recommended when maximum fuel pressure may exceed 75 psi (intermittently) Do not use with 267 secondary pump.TI Automotive F90000285470lph E85 rated. 10% more flow and 25% more heat than F90000274. Recommend 274 for primary use over this pump unless the extra capacity is required. DISCLAIMER: Due to the nature of performance applications, all products are sold without any expressed warranty or any implied warranty of merchantability or fitness for a particular purpose. The seller shall not, under any circumstances be liable for any special, incidental or consequential damages, including, but not limited to, damages or loss of other property or equipment, loss of profits or revenue, cost of purchased or replacement goods, or claims of customers of the the purchaser which may arise and/or result from the sale, installation or use of these parts. Any warranty would be at the complete discretion of the manufacturer. For more info and installation instructions please visit the manufacturer's website.

Price: 2099.95 USD

Location: Hubert, North Carolina

End Time: 2025-01-15T21:57:05.000Z

Shipping Cost: 19.95 USD