2 HushMat 82450 Wave Breaker Speaker Backwave Deflecting Pads 8" x 8" x 1/2" NEW

Description: This is for one (1) pair of two (2) Hushmat 82450 Wave Breaker Backwave 8" x 8" x 1/2" Speaker Deflecting Pads The Wave Breaker structure is designed to efficiently disrupt sound waves into a random surface thus allowing the full sound quality of the speaker to perform w/o distortion. [ NOTE: I bought them & never used them (white backside adhesive stickers are still on them) SEE PICS[ NOTE: These normally retail for anywhere from about $38.00 to as high as $55.00 - these are brand NEW The HushMat Speaker Wave Breaker Kit is used to treat standing waves or back waves in every speaker in your car, truck, boat, RV, office & home. Hushmat 82450 Wave Breaker Backwave Deflecting Kit includes 2 pads (8" x 8") w/ self-adhesive backed material. Each 8 in. x 8 in. HushMat Wave Breaker makes every speaker sound better! Speakers transmit sound waves in two directions - out the front is called music - out the rear of speaker is called "back wave". Back wave bounces off the solid surface behind the speaker magnet & reflects back taking the speaker out of phase. Wave Breaker installed allows you to hear all the music you paid for from that speaker w/o the back wave.Bonds to fiberglass, plastic, and all metal surfaces so it can be used in your home, boat, car, or RV. Wave Breaker solves a problem that exists in every speaker. Wave Breaker breaks up back waves that distort the true speaker sound. Use for every speaker install. Wave Breaker can upgrade the sound of original equipment stereo speakers.Wave breaker can be used to treat standing wave or back wave in every speaker in your car, truck, boat, RV, office & home. Wave breaker is placed on the solid surface directly behind the speaker magnet & eliminates standing wave back wave from that speaker. Standing wave is created in every when the speaker cone moves in & out waves are created in two directions. The wave that moves out the front is called music. The wave that comes out the back of the speaker is called noise. This back wave reflects off the solid surface behind the speaker & bounces back to the front essentially throwing the speaker out of phase. When HushMat Wave Breaker is placed behind the speaker these back waves are absorbed & broken up in the wave breaker molecular structure. This prevents the bounce back & therefore prevents the distortion. Therefore you get all the music you paid for out of that speaker. It is simple to use. It cuts w/ scissors & then just peel & stick. HushMat is made from incredible adhesive technology makes this product a very simple install. HushMat is the only OEM specified & approved sound deadening & thermal insulating material available to the automotive aftermarket. The HushMat Wave Breaker sound deflecting pads are designed to eliminate the back wave created from your car's speakers. Speakers create sound by simply moving air at specific frequencies. You are able to see speakers move the air when you see the mid-range cone of your speaker move when it is playing music. As the speaker creates sound going toward you, it also creates sound going backwards. This sound travels backwards & then typically bounces off the surface behind the speaker. When the waves hit that surface they then bounce back going toward to front of the speaker & you the listener. When the back wave bounces off the hard surface, it does not stay the same, but rather inverts. Since, sound travels both above & below 0 it actually cancels the sound the speaker is making. For example, if that sound wave hits the surface at 1, it will bounce back at -1, thus being the inverse or opposite of the sound that first struck it & a net of 0 (1 + (-1)=0). When back wave travels back toward you, it is creating distortion & you are losing sound quality. These HushMat wave breaker pads absorb that back wave so that you can more crisp, clear highs & more defined mid-range sound. The sound difference is quite remarkable & you will definitely hear the difference. The HushMat Speaker Wave Breaker makes every speaker sound better. Speakers transmit sound waves in 2 directions—out the front is called music, out the rear of speaker is called "back wave." Back wave bounces off the solid surface behind the speaker magnet and reflects back, taking the speaker out of phase. HushMat's Wave Breaker, when installed, allows you to hear all the music you paid for from that speaker - w/o the back wave. The special adhesive technology on these two 8in. x 8in. Wave Breaker pads will keep the pads in place. HUSHMAT Wave Breaker is pressure-sensitive, semi-closed large cellular, synthetic rubber foam, which has excellent adhesion properties. The Wave Breaker structure is designed to efficiently disrupt sound waves into a random surface thus allowing the full sound quality of the speaker to perform w/o distortion. Wave Breaker is also a very light weight substrate & will bond directly to the HushMat Ultra on door speaker applications or the back of sub woofer enclosures.HUSHMAT Wave Breaker is temperature & environment resistant & will maintain adhesion through all automotive environments (up to 300 degrees F). Humidity, UV & other conditions consistent w/ automotive use will not disrupt Wave Breaker performance.The superior adhesive properties of HUSHMAT Wave Breaker allow it to be used in horizontal, vertical or inverted applications. It has good conformability & can be applied on complex shapes. Wave Breaker effectively disrupts back wave from speakers in a wide frequency spectrum from 10 to 15000 Hz | Withstands ambient temperatures from -30 degrees up to +300 degrees Fahrenheit | Low moisture absorption & outstanding UV & environmental stability8” x 8” pads: 1 wave breaker per co-axial speaker or 2 wave breakers per sub woofer | Bonds to fiberglass, plastic & all metal surfaces | Self Adhesive peel & stick – no secondary glue - adhesion guaranteed | Trims w/ standard razor knife or household scissors The HushMat Speaker Wave Breaker Kit is used to treat standing waves or back waves in every speaker in your car, truck, boat, RV, office & home. Place it on the solid surface directly behind the speaker magnet to eliminate standing waves or back waves from that speaker. A standing wave is created when the speaker cone moves in & out, creating waves in 2 directions. The wave that moves out the front is called music. The wave that comes out the back of the speaker is called noise. This back wave reflects off the solid surface behind the speaker & bounces back to the front, essentially throwing the speaker out of phase. When a HushMat Wave Breaker pad is placed behind the speaker, these back waves are absorbed & broken up. This prevents the bounce back & therefore prevents the distortion. Wave Breaker is simple to use & easy to install—it cuts w/ scissors! Then, just peel & stick. The special adhesive technology will keep the pads in place. Get all the music you paid for out of that speaker w/ these two 8 in. x 8 in. Wave Breaker pads from HushMat! Wave Breaker effectively disrupts back wave from speakers in a wide frequency spectrum from 10 to 15000 Hz / 1.5kHz | Withstands ambient temperatures from -30 degrees up to +300 degrees Fahrenheit | Eliminates distortion due to bouncing sound wavesReduce Standing Wave & Back Wave from all Speakers | Bonds to fiberglass, plastic & all metal surfaces | 8” x 8” (0.89 sq. ft.) pads - 1 wave breaker per co-axial speaker or 2 wave breakers per sub woofer | For use w/ speakers or woofers | Installs Behind the SpeakerTrims w/ standard razor knife or household scissors | Self Adhesive peel & stick – no secondary glue - adhesion guaranteed | Adhesion guaranteed | Sound-Deadening Kit | Soft Pliable Formable & Self Adhesive | One Step Peel & Stick ApplicationImproves Sound Quality By Absorbing & Deflecting Backwave Noise | Low moisture absorption & outstanding UV & environmental stability | Can be bent around 25mm mandrel at -30 degrees C w/ no cracking or loss of adhesion | Designed & Manufactured in Kansas, USA! COLOR: Polymer - Black | MASS: Approx. 0.2 pounds per cubic foot | THICKNESS: 13mm or 1/2" | COLD FLEXIBILITY: Can be bent around 25mm. mandrel at -30°C w/ no cracking or loss of adhesion. FLAMMABILITY:Tested per FMVSS 302, HUSHMAT Wave Breaker is self-extinguishing & meets all aspects of the standard | DENSITY: 6.6-lbs / cubic ft | ELONGATION: 510% | TENSILE STRENGTH: 7.0 lbs / sqr in SOUND ABSORPTION at 600-4000Hz: Excellent | WAVE DIRECTION: Variable | WEATHERABILITY: Excellent | WATER ABSORPTION at 60% COMPRESSION: 4.6% or less | TEMPERATURE RANGE: 300F to -40F UV STABILITY: Excellent | THICKNESS RANGE: 1/2 in. (13mm) | ADHESIVE STRENGTH: 45 oz. per inch | AIR PERMEABILITY: 85% Material: Made from semi-closed large cellular, synthetic rubber foam that has a self adhesive backing | Design: Disrupts sound waves into random surface allowing your speaker to provide full sound quality w/o distortion.Temperature Resistant: Adhesion will be maintained from temperatures up to 300 degrees as well as withstanding humidity & other environmental conditions.

Price: 18 USD

Location: Horace, North Dakota

End Time: 2025-01-09T19:50:25.000Z

Shipping Cost: 0 USD