2 Case Ejectors For Dillon XL650 / 750 NONE BEARING / BUSHING Type.

Description: This listing is for Two NONE Bearing / Bushing type Case Ejectors for the Dillon XL650 / 750 this upgrade Part Replaces the OEM Wire Ejector. Please Note .. This part is designed to only work with a stock setup, this means NO bushing or bearing on top of the shellplate. If you need a case ejector that is compatible with the use of a bear/bushing on top of the shell plate please see eBay item number: 274731476324 ALL designs are my own and I do all my own printing . If you have any Questions or Issues Please let me know. This case ejector has been tested on .380 acp up to 45 acp . Also .223/5.56 This is a 3D printed part and is My Redesign to fix issues I've ran into with some of the current available Ejectors designs. 1. Moved the location of the setscrew and square nut, so you can access it when the shellplate has cases / rounds in it. . 2. Added fillets and thickened up the area where the square nut is located to help prevent stretching. 3. Increased clearance between the ejector and the case insert slide to prevent binding and to ensure case insert slide has full travel. 4. Increased clearance between case insert slide and the finished round chute . Allows for more caliber uses and the ability to adjust rotation for the perfect case ejection 5 The hardware is stainless steel . As an advid reloader myself , My goal is to offer you the following . 1. Design As many features into a part as possible to make your reloading faster, easier and more precise .2 . Offer the Highest quality prints as possible. 3. Offer The Lowest cost as possible. Please visit my E-bay store for more reloading parts.

Price: 8 USD

Location: Clinton, Ohio

End Time: 2023-12-08T01:20:21.000Z

Shipping Cost: 4.99 USD