1970 Chevy Camaro Firebird Hydro Boost Power Brake Booster Hydrobooster Hose Kit

Description: 1970-1981 Camaro Body BLACK Hydro Boost Power Brake Booster Firewall Mount Kit 1970 Chevy Camaro Firebird Hydro Boost Power Brake Booster Hydrobooster Hose Kit Click images to enlarge Description The Hydro-Boost is powered by hydraulic pressure from the power steering pump. It requires 'no vacuum'. This has several advantages. No external vacuum pump required on low vacuum high performance motors. No 'small bore' master required. Firewall and valve cover clearance is increased. Frame mounted clearance is increased. Frame mounted Hydro-Boosts® are the same width as a master cylinder, giving additional exhaust clearance. The Hydro-Boost® can be fitted any where a vacuum booster will fit. It can use stainless braided hoses or rubber type and brackets are available for most applications. The Hydro-Boost® uses fluid pressure from the existing power steering pump. The average power steering pump puts out from 800psi to 1400psi. The Hydro-Boost® uses this pressure that is always circulating through it, to convert to pressure to apply against the master cylinder. The output of the Hydro-Boost® is affected by three factors. 1. The pedal ratio. We prefer that the pedal ratio be between 6:1 to 7:1. 2. The pressure output from the pump. 3. The master cylinder bore diameter. These are factors necessary to design the system that will work for a given application. It is imperative that the system be clean. Any residual metallic sediment laying in an old pump or steering box, will be floated up and through the system when the fluid comes through on start up. If any of this sediment lodges in the relief valve of the pump, there will be no pressure from the pump. This will result in hard steering and no power brakes. Kit includes: Hydro Power brake booster with firewall mount brackets, push rod and pedal clevis (1964-72 gm A body) This kit does not include a master cylinder so you can use the style of master you want. The mount studs for the master cylinder are 3 3/8" center to centerGearhead 4 Foot Hydraulic Brake Assist Rubber Hose Kit The Gearhead high quality hydraulic hose kit is just what you need to complete your Hydroboost or Hydrastop install. Gearhead hoses are extra durable and are a cut to fit, which makes them perfect for just about any car/truck. The kit has everything needed to connect you hydraulic assist to you pump and steering box/rack and pinion. Hose Kit Includes:(2) 4' rubber high pressure hoses (90° -6AN female fittings already crimped on) (1) 6-1/2' 3/8" return line (one 3/8" push lock 90° to a -6AN female installed)(2) 90° -6AN female re-usable hose ends(1) 3/8" push lock 90° to -6AN female fitting(1) 3/8" brass barb tee fitting(6) 1/2" To 29/32" hose clamps(2) 16MM O-ring to -6AN male fittings(2) 18MM O-ring to -6AN male fittings(2) 5/8" inverted flare to -6AN fittings(1) 11/16" inverted flare to -6AN fitting(1) 5/16"-24 O-ring to -6AN fitting Vehicles This Kit is Designed For: 1970-1981 Chevy Camaro Professional Installation is Highly Recommended (No Instruction Included) Pictures sell! Auctiva offers Free Image Hosting and Editing.300+ Listing Templates! Auctiva gets you noticed! The complete eBay Selling Solution. Track Page Views With Auctiva's FREE Counter

Price: 419.95 USD

Location: Hudson, Iowa

End Time: 2025-02-04T21:21:08.000Z

Shipping Cost: 0 USD