1965 - 1970 Mustang TCI IFS Kit for Modular Ford Engines

Description: COMPLETELY FREE SHIPPING FOR A LIMITED TIME ON THIS KIT TO ANYWHEREIN THE 48 STATES!! PLUS, YOU WILL GET A FREE SWAY BAR KIT, INNER FENDER PANELS AND SMALL BLOCK ENGINE MOUNTS!**KIT NOW COMES WITH DRILLED/SLOTTED ZINC COATED ROTORS, BIG BORECALIPERS AND RIDETECH COIL-OVERS FOR NO EXTRA CHARGE!! 1964 - 1970 Mustang TCI Independent Front Suspension for Modular EnginesTCI Engineering's New Custom Independent Front Suspension engineered for: 5.0 Coyote Motors, 5.4 & 4.6 modular motors Only. This Custom IFS has been designed to fit 1964 -1970 Ford Mustangs and 1967-1969 Mercury Cougars only. See Below for More Info.Note: Transmission tunnel may have to be modified depending on your choice of transmissions Note: Master cylinder will have to be relocatedThe standard suspension is shown on the left side of the picture, Available upgrades shown on the right side.We know it's pretty obvious but we have to say it: No, the engine does not come with this suspension kit - engine is pictured just for display purposes. Note: The kit includes the following options: Standard Rotors with 1 Piston Calipers. Upgrades are available so if you would like to upgrade let us know. Please tell us if you would like the 2" drop Spindles or the Standard Height Spindles when you purchase. Introducing: TCI Engineering's New Custom Independent Front Suspension engineered for: 5.0 Coyote Motors, 5.4 modular motors and 4.6 modular motors Only. This Custom IFS has been designed to fit these vehicle applications only: 1964 - -1970 Ford Mustangs and 1967-1968 Mercury Cougars. With this all American made product TCI has increased the performance, strength, control, drivability, handling, installation, capabilities and style of your vehicle. Let Total Cost Involved Engineering turn your classic mustang or cougar into a low slung, corner-hugging, stop-on-a-dime pro touring muscle car!Features and BenefitsCustom Independent Front Suspension This front end is built for the Mustang & Cougar fastbacks, coupes and convertibles The primary crossmember has a reinforced square tube 1 ?? x 1 ?? x .188 wall American made steel that has been mig & tig welded together within the center of the crossmember from control arm pin to pin for a reinforced wall thickest of 3/8 of inch for more strength, durability and increase roll stiffness Custom IFS design has eliminating the factory shock towers for more engine bay clearance & more header clearance This front end has been engineered for the 5.0 Coyote motor, 5.4 modular motor and 4.6 modular motor - Only Crossmember has been engineered to lower the center of gravity of your vehicle to decrease body roll & increase handling performance TCI's Custom IFS supports the factory oil pans from the 5.0 Coyote motor, 5.4 modular motor & 4.6 modular motor The motor mounts have been engineered with laser cut precision American made steel, metal wall thickest is 3/16? and fabricated with Mig & Tig Welds for strength & durability The 4.6, 5.0 & 5.4 motor mounts are only designed to be bolted on to the TCI Engineering Custom IFS Firewall clearance has been engineered into the design of the motor mountsWeld-In Assembly Includes:Dare to Be Different on Looks, Style and PerformanceCustom Independent Front Suspension- Urethane bushed tubular A-arms- Synthetic grease-able urethane bushings- Manual rack and pinion steering- TCI custom 2" drop spindles or Stock Height Spindles- Bolt-on engine mounts- 1" Performance anti-roll bar- 1" Upper tubular A-arms- 1 1/8" Lower tubular A-arms- Inner fender panels- RideTech 26 Position Adjustable Coil-over shocks- 11" Drilled & slotted rotors zinc plated rotors- Big bore calipers (with 20% better clamping forceWhat will you receive from this TCI Engineering Product? - USA Made Product- Product engineered from US DOM Steel- 37 years of quality manufacturing- 37 years of tested & proven engineering- Better handling around turns and more controlled braking- Comprehensive customer service- Knowledgeable technical staff- Unlimited warranty on fabricated partsClick Here for Install Article in Modified Mustang and Fords Magazine

Price: 5073 USD

Location: Terra Bella, California

End Time: 2024-12-30T17:52:14.000Z

Shipping Cost: 249 USD