12/24V 10-100A Dual USB MPPT LCD Solar Charge Controller Panel Battery Regulator

Description: Product Description Note : This version is Modified MPPT version which will have more efficient than PWM but cheaper than TRUE MPPT Version. So You should confirm this condition before Order. MPPT Orange Safety Instructions: Make sure your battery has enough voltage for the controller to recognize the battery type before first installation. Controller Provided MPPT Maximum power point tracking Function, charging mode is PWM Make sure your battery has enough voltage for the controller to recognize the battery type before first installation. The battery cable should be as short as possible to minimize loss. The regulator is only suitable for lead acid batteries: OPEN, AGM, GEL It is not suited for nickel metal hydride, lithium ions or other batteries. The charge regulator is only suitable for regulating solar modules. Never connect another charging source to the charge regulator. System Connection: Connect the battery to the charge regulator - plus and minus. it will show 1, if it detects 12V battery, 2 if it detects 24V battery. Connect the photovoltaic module to the regulator - plus and minus. Connect the consumer to the charge regulator - plus and minus. Feature： Automatic Identification System Voltage,12V/24V auto recognition. Completed technical data for setup and modify. The load control mode can be selected， the timer function canbe reset for street light at night. Discharge capacity control& Discharge Counter of Ampere Hour. Working Storage Function： record the total run time of system,Record timers of error during running time， record times of full charged battery. Solar Panels， Battery， Solar Charge Controller positive poles areall connected together， adopting negative MOSFET in series control circuit. LCD display &Double Button Operation :high-definition display device status. Dual USB 2.4A fast charging ports, pure copper wiring port with good conductivity. Six intelligent safety protection&stable output, rapid operation :Efficiency increased by 30% with high voltage protection, short circuit protection, reverse connection protection,temperature protection, overload protection, low voltage protection. Alloy heat dissipation backplane fast heat dissipation: prevent the device from running for a long time to cause the circuit to heat up. Widely used: RV solar panel power supply in the car, solar panel large-scale power generation system, solar panel environmental protection street light, yachts and ships. Specifications: Model 30A/50A/70A System Voltage 12V/24V Max. Input Voltage of solar panel 55V Self-consumption 10mA Max.charge current 30A 50A 70A Max. discharge current 30A 50A 70A LVD 11.0V,ADJ 9V-12V;x 2/24V LVR 12.6V ,ADJ 11V-13.5V;x2/24V Float Voltage 13.8V ,ADJ 13V-15V;x2/ 24V Boost charging 14.4V ;x2/24V Battery Voltage less than 12Vstart boost charging 2 hours Battery Over Voltage Protection 16.5V;x2/24V Reverse Connection Protection yes Load Over Current Protection Yes, each two minutes restart once Temperature Compensation -24 mV /°C for 12V system;x 2/24V Working Temperature -20℃ ＋55℃ Waterproof grade IP32 Size 30A 175.9mmx139mmx40.1mm Size 50A 209 .3mmx191.7mmx52.9mm Size 70A 229.4mmx201mm×54.7mm USB 5V 2.1A DC output 12V/24V You'll Receive: 1 x Solar Panels Battery Charge Controller 1 x User Manual MPPT/PWM Orange Feature： Advanced maximum power point tracking (MPPT/PWM) technology, the efficiency is not less than 99.5%. High-quality components improve the system performance, and the maximum conversion efficiency is 98%. Super fast tracking speed and guarantee tracking efficiency. Large screen LCD display, charge and discharge current display, cumulative power generation and discharge power query, temperature display, light control + delay control; adjustable charge and discharge parameters, with power-off memory and other functions. Dual USB output, the maximum current is 2.5A. Equipped with all necessary protection devices, the control parameters of the system are adjustable, easy to set up and operate. Built-in overheating, overcurrent, short circuit, open circuit protection, fault elimination, controller automatic recovery. Two-way MOS tube anti-backflow circuit, high-power charging mode, ultra-low heat. Built-in short circuit protection, open circuit protection, reverse connection protection, overload protection. Reverse current protection, low calorific value, with self-recovery function, will not damage the controller. Real-time display of temperature, charging current and discharge current. Current autofocus MPPT tracking charging, high charging efficiency, charging process does not stop detection, two-way focus tracking. Specifications: Name LCD Screen Solar Controller Model 10A/20A/30A Voltage DC 12V / 24V Display LCD screen Self-consumption <10MA Overcharge protection 14.4V / 28.8V Overcharge Float charge 13.7V / 27.4V Charge recovery voltage 12.6V / 25.2V Over discharge protection 10.7V / 21.4V Over discharge recovery 12.6V / 25.2V Dual USB output 5V / 2A (charge mobile phone, iPad, etc.) Working temperature -35 ℃ - 60 ℃ 12V fits 18V solar panel, 24V fits 36V solar panel 12.0 volt lead acid battery corresponding The float voltage is set to: 13.6 The recovery discharge voltage is set to: 12.6 The discharge cut-off voltage is set to: 10.7 12.8 volt lithium iron phosphate battery corresponding The float voltage is set to: 14.6 The recovery discharge voltage is set to: 13.6 The discharge cut-off voltage is set to: 11.0 11.1 volt lithium battery corresponding The float voltage is set to: 12.6 The recovery discharge voltage is set to: 11.6 The discharge cut-off voltage is set to: 9.6 You'll Receive: 1 x Solar Panels Battery Charge Controller 1 x User Manual MPPT Blue Safety Instructions: Make sure your battery has enough voltage for the controller to recognize the battery type before first installation. The battery cable should be as short as possible to minimize loss. The regulator is only suitable for lead acid batteries: OPEN, AGM, GEL It is not suited for nickel metal hydride, lithium ions or other batteries. The charge regulator is only suitable for regulating solar modules. Never connect another charging source to the charge regulator. System Connection: Connect the battery to the charge regulator - plus and minus. it will show 1, if it detects 12V battery, 2 if it detects 24V battery. Connect the photovoltaic module to the regulator - plus and minus. Connect the consumer to the charge regulator - plus and minus. 100% brand new and high quality. Build-in industrial micro controller. One-key setting,digital display,auto memory function. MPPT solar charge controller MPPT: Compared with normal solar charge controller, this MPPT controller could increase efficiency by 10%-30% This controller can charge and discharge at the same time. This MPPT controller has perfect SOC function, control charge current, and supply power to the loads. Function: Rated Voltage 12V/24V Rated Current 10A/20A/30A/40A/50A/60A Max PV Voltage 23V(12V Battery) 46V(24V Battery) Max PV Input Power 30A: 360W (12V) 720W (24V) 40A: 480W (12V) 960W (24V) 50A: 600W (12V) 1200W(24V) 60A: 720W(12V) 1440W(24V) 100A: 1200W(12V) 2400W(24V) Size 17*9.2*4.5cm Operating temperature -10+60℃ Material ROHS+ABS Application Home, Industrial, Commercial You'll Receive: 1Pcs Solar Charger Controller(Current as you choose) 1Pcs User Manuel

Price: 11.99 USD

Location: Rancho Cucamonga, California

End Time: 2023-12-25T02:36:57.000Z

Shipping Cost: 0 USD