12 x 6 “SNAP-STRATE” 0.45" x 0.4375" HIGH PURITY ALUMINA TILE ARRAY No.: 393

Description: 12 x 6 “SNAP-STRATE” ARRAY of 0.45" x 0.4375" HIGH PURITY ALUMINA TILE SUBSTRATE No.: 393 The specifications for these components are as follows: Array: Length Overall: Approximately 5.400” +/-0.010" (137 mm)Width Overall: Approximately 2.6125” +/-0.010" (67.5 mm)Thickness: Approximately 0.040” (1 mm) Tile Dimensions:Length Overall: Approximately 0.450” +/-0.002" (11.43 mm)Width Overall: Approximately 0.4375” +/-0.002"(11.11 mm)Thickness: Still Approximately 0.040” (1 mm) You are buying ONE (1) each of a High Purity Alumina Ceramic “Snap-Strate” Substrate. They are in mint condition being NOS (New Old Stock). They are made from 96% purity Aluminum Oxide (Al2O3) which of course is Alumina. Generally the balance of composition for this purity Alumina material is of Silicon Dioxide (SiO2) which is Silica. They have been laser scribed on one face into 72 individual 11.4 mm x 11.3 mm x 1 mm thick small substrates. They may be hand snapped to the size substrate you desire for you application as indicated in the photos. This material has very high hardness, very high stiffness, very good corrosion resistance to chemicals at high temperature, and very high refractoriness or use temperature. They may be used for a variety of electrical, mechanical, and thermal applications. They may be used as setter plates for firing parts in a kiln. The may be used for high temperature furnaces and as high temperature refractory turntables. They may also be used for jewelry or for applications requiring high wear or abrasion resistance. Your imagination is the only limiting factor in the spectrum of possible applications for this component. Be sure to view all photos as they are an integral component of the item description. The specifications for these components are as follows: Array: Length Overall: Approximately 5.400” +/-0.010" (137 mm)Width Overall: Approximately 2.6125” +/-0.010" (67.5 mm)Thickness: Approximately 0.040” (1 mm) Tile Dimensions:Length Overall: Approximately 0.450” +/-0.002" (11.43 mm)Width Overall: Approximately 0.4375” +/-0.002"(11.11 mm)Thickness: Still Approximately 0.040” (1 mm) Please Note: These are not precision technical ceramic components. There is no warp or camber Specification for this item. However they are relatively flat. There may also be “firing” color variations inherent in the material. The thermal shock resistance is not very high so exercise rule of thumb caution. “The larger the piece of material the slower the rate of temperature increase should be applied to the piece.” Heat up slowly to avoid cracking in use. Specific Gravity or Density: 3.9 g/cm3 Water Absorption or Porosity: 0% Fusion Temperature or Melting Temperature: 2000 °C or 3632 °F Maximum Working Temperature: 1500 °C or 2732 °F Thermal Conductivity: 25 W/m* K Specific Heat: 0.9 J/g*K Expansion Coefficient or CTE: 7.5 x 10-6 inches/°C Electrical Resistivity at 20 C: 10 E14 Ohm*cm Electrical resistance at 600 C: 10 E8 Ohm*cm Modulus of Elasticity: 44 x 10 E6 p.s.i. or 350 GPa. CAUTION: Edges and corners may be sharp! These components were not specifically manufactured for an individual application; therefore be sure to check the dimensional descriptions carefully for your application. Future returns or requests for refunds, because of some "fit" issue or the like will not be honored. Please check the other Alumina component variants that are available in my listings for the sizes that best fits your requirement. Your imagination is the only limiting factor in the spectrum of possible applications for these components and materials. If you require additional technical information, design, or application engineering consultation, feel free to contact us. As a materials scientist with four decades experience in high temperature processing, ceramics, dentistry, and jewelry manufacture it will be possible to provide you with knowledgeable, creative and imaginative approaches to your requirements. Feel free to ask any questions you may have regarding this item early. Use PayPal only. Combined shipping discount is provided for multiple item purchases. For best results, please be sure to shop using cart, then complete the paying transaction when you are satisfied that all the items you need are in the cart. Items purchased separately will be shipped separately as a unique transaction. Please complete payment transactions within 3 days. Items are generally shipped via USPS first class mail with delivery confirmation. Ask about shipping costs to your country. Feedback is provided for all buyers. We will appreciate yours as well. We strive to maintain excellent customer service; and are able to solve virtually any issues you may have. Every effort to provide the most accurate information about this item and every appropriate precaution in packaging this item is made, to assure that your highest expectations and satisfaction are met, and are exercised to meet this requirement for excellence. In winning this auction or purchasing this item you are agreeing that you will first provide the seller every opportunity to provide redress or resolution to any issues you many have concerning this item, prior to leaving any negative feedback about the seller or the item. No.: 393

Price: 18 USD

Location: Baldwinsville, New York

End Time: 2025-01-18T20:16:24.000Z

Shipping Cost: N/A USD