1 Inch Pneumatic Air Actuated Stainless Ball Valve Single Acting Normally Closed

Description: 1" Inch Pneumatic Stainless Steel Air Actuated Ball Valve Single Acting Normally Closed WIC Valve PVS series 1" Inch NPT pneumatic air actuated valve ball valve comes with a stainless steel 3-piece ball valve body, it provides a easy installation and maintenance through the slide out body method. This industrial air actuated valve is used to control the on and off of the valve for media such as air, gas, liquid, water and steam. PVS series single acting air actuated ball valve use air pressure to open the valve and springs to close the valve. The characteristic of the air actuated ball valve is that it has a higher flow rate, higher temperature resistant and higher pressure compare with the direct acting valve. PVS Series Pneumatic Air Actuator Ball Valve Specifications: Model Number: PVS-1-T Valve Type: 2 Way Normally Closed Service Media: Air, Gas, Liquid, Water, Steam Operation Model: Air Actuated Single Acting (Spring Return) Actuator Operating Pressure: 100 PSI Standard Body Material: 316 Stainless Steel / CF8M Seal Material: PTFE Operating Pressure: 0 to 1000 PSI at 100 °F Media Temperature: -51 to 230 °C (-60 to 450 °F) Ambient Temperature: -20 to 80 °C (-4 to 176 °F) Port Size: 1" NPT Female Port Standard Pneumatic Air Actuator Specifications: Pneumatic Actuator Specifications Actuator Standard ISO 5211, NAMUR, DIN 3337 Operating Pressure Range Min: 45 PSI - Max:120 PSI Operating Media Pressurized Filter Air Operating Temperature –20 to 80°C 3 Pieces Stainless Steel Ball Valve Specification: Operating Pressure: 3/8" to 2" : 1000 PSI @ 100°F WOG Operating Temperature: -60 to 450°F Port Style: Full Port Port Connection: FNPT Mounting Standard: ISO 5211, DIN 3203-M3 Ball Valve Parts and Materials Part Name Material Quantity Ball SS 316 1 Body Connector SS 316 / CF8M 1 Body Connector Bolt SS 304 4 Body Connector Nut SS 304 4 Body Connector Washer SS 304 4 CAP SS 316 1 Gland Nut SS 304 1 Joint Gasket PTFE 1 Seat PTFE 2 Stem SS 316 1 Stem Nut SS 304 1 Stem Packing PTFE 1 Stem Washer SS 304 1 Thrust Washer PTFE 1 WIC Valve PVS Series Pneumatic Air Actuator Internal Structure: 1. Indicator: Position indicator with NAMUR mounting standard. 2. Pinion: High precision piston is made by nickelled alloy steel. Fully conform with ISO5211, DIN3337 and Namur. 3. Actuator Body: Extruded aluminum alloy ASTM6005 body. 4. O-Rings: High quality NBR (Buna-N) 5. Pistons: Die-casting aluminum twin rack pistons are treated with hard anodized. Symmetric mounting position that ensure a fast operation and long cycle life. 6. Travel Adjustment bolts: Two independent external travel adjustment bolts allow ±5° adjustment for both open and close directions. 7. End Caps: Die-casting aluminum powder polyester. 8. High Performance Springs: Preloaded coating springs are made by high quality material for corrosion resistant. 9. Bearing & Guides: Made by low friction compound material to minimize the direct contact between metals. PVS Series Air Actuator Component Drawing: No. Name Qty Material 1 Indicator Screw 1 Plastic 2 Indicator 1 Plastic 3 Spring Clip 1 Stainless Steel 4 Washer 1 Stainless Steel 5 Outside Washer 1 PTFE 6 Body 1 Extruded Aluminum Alloy 7 Inside Washer 1 PTFE 8 Cam 1 Alloy Steel 9 O-ring (Pinion Top) 1 NBR 10 Bearing (Pinion Top) 1 Engineering Plastics 11 Pinion 1 Alloy Steel 12 O-ring (Pinion Bottom) 1 Engineering Plastics 13 Bearing (Pinion Bottom) 1 NBR 14 Plug 2 NBR 15 O-ring (Adjust Screw) 2 NBR 16 Washer (Adjust Screw) 2 Stainless Steel 17 Nut (Adjust Screw) 2 Stainless Steel 18 Adjust Screw 2 Stainless Steel 19 Piston 2 Cast Aluminum 20 Guide (Piston) 2 Engineering Plastics 21 Bearing (Piston) 2 Engineering Plastics 22 O-ring (Piston) 2 NBR 23 Spring-Integrated 0~12 Spring Steel 24 O-ring (End Cap) 2 NBR 25 End Cap 2 Cast Aluminum 26 Cap Screw 8 Stainless Steel 27 Stop Screw 2 Stainless Steel 28 Nut ( Stop Screw) 2 Stainless Steel PVS Series Air Actuator Operating Principle: Pressurized air is introduced to Port A that forces the pistons outward. It causes the springs to compress and the piston turns counterclockwise which closes the valve. Meanwhile air is being exhausted from port B (See Drawing 1) When the pressurized air is not applied to Port A, the air pressure loss. The compressed springs extend and forces the pistons inward. As the springs extend, it rotate the actuator and the pinion turns clockwise which opens the valve. (See Drawing 2) Pneumatic Actuator Dimension & Mounting Connection: Shipping Information: Shipping on this item is FREE within the United States. We ship to Alaska, Hawaii, Puerto Rico, Guam, Virgin Islands, APO/FPO. For domestic fitting orders, we ship via US Postal Service First Class Mail (transit time for delivery 2 - 5 business days), unless other shipping method is requested. For international orders, we ship via US Postal Service First Class Mail. (transit time for delivery 5 - 14 business days), unless other shipping method is requested. International customers are responsible for all customs duties, taxes and tariffs. Order Tracking Info: Most orders are shipped within 1-2 business days. Delivery confirmation number will be emailed to you once your package has been shipped. Sales Tax: California residents pay 8.75% sales tax. Customers from other states or countries do not pay sales tax. Return Policy: We want you to be completely satisfied with your purchase. In the event you are unsatisfied, you may return the item providing it is in the same condition as received within 30 days of your invoice date. All damaged and / or defective items must be reported within 5 days of receipt. All returns shipments must be prepaid by sender. Shipping and handling is not refundable. A restocking fee of 20% may be applied to returned merchandise. Returns are not accepted without a prior return authorization number. Contact Us: Should you have any questions, please feel free to contact us by sending an email to our friendly customer service team. We are more than happy to assist you.

Price: 269.99 USD

Location: San Jose, California

End Time: 2024-09-22T21:16:09.000Z

Shipping Cost: 0 USD