London Jeans

1-6" Adjustable Lower Control Arms fits Dodge Ram 10 -13 2500 3500 Dodge Ram 4WD

Description: Adjustable Steel Lower Control Arms for 1-6" Lift Heights 10-13 Dodge Ram 2500/3500 4WDStryker Off Road Designs' Adjustable DOM (Drawn Over Mandrel) Control Arms! These are brand new adjustable tubular control arms for the front of a Dodge Ram 1500/2500/3500 4x4. These WILL fit the 1500 Megacab 4x4 as well. This is for a set of 2 oppers. Our arms are black powder coated. They come ready to install, with pre-installed zerk fittings, Daystar PTMEG poly bushings, DOM sleeves, etc. Simply re-use your factory hardware. What sets ours apart from other competitors? We use DOM tubing in the collars of the arms AS WELL as the sleeve. Take a look at the sleeve pics. On the left is our Stryker sleeve. On the right is a competitors. We use heavy wall DOM tubing, with NO split seam, for our sleeves. The issue with the competitors sleeves is they are thinner wall and simply rolled over. This leaves a gap/seam. These arms take a lot of back and forth pressure. Over time, the other sleeves start to pull apart at that seam, creating a sharp edge inside the bushing, causing the bushing to shred from the inside. Our sleeves are DOM, with no seam, and a much heavier wall thickness. These are guaranteed!These adjustable arms also feature 4140 Chromoly fine thread shanks! This material is SAFE TO WELD. While other manufacturers are content to use any old "all thread" material to make their shanks, we did the research to find the best, and SAFEST, material to use for our adjustable arms! Welding changes the composition of metal, and most "all thread" material is NOT considered safe to weld due to these compositional changes. Our shanks are machined, not cast/formed, so welding them is perfectly safe, while the fine thread allows for precise adjustability. Additionally, these shanks are TIG welded to our DOM collars for ultimate strength! Stryker is confident in offering you a LIFETIME WARRANTY on our DOM (Drawn Over Mandrel) control Arms because the Quality of the Engineered Design, Materials used, Manufacturing Process, Finishing and Final Inspection WARRANT ONE!CAD Designed for your HEAVY DUTY TRUCK.Our Heavy Duty DOM control arms will exceed the requirements of your Dodge Heavy Duty truck!Daystar PTMEG* (Polytetramethylene Ether Glycol) bushings to outperform the lower cost RUBBER used in most competitors offerings (including the OEM arm).We also use DOM (Drawn OVER MANDREL) Steel Sleeves to manage the lifetime wear these arms will endure.Stryker's Craftsman Welders build these in HOUSE here in Marysville, TN!Powered Coated in the USA under strict Stryker oversight and inspection.Threaded ZERK fittings for a lifetime of optimal performance!And designed for the EXACT Truck Model, Year and Lift Height to ensure all the measurements AND Components MATCH the requirement. Not a bunch of spacers and shims to make something kind of work! Benefits: Adjustable from Stock to 4" lift heightTIG welded 4140 Chromoly fine thread shanksStronger than factory stamped steel armsBeefy tubular steel construction w/ DOM collarsDaystar brand PTMEG poly bushingsYear-model-specific DOM sleevesGreasable zerk fittings pre-installedMade in the USA! Description: Our strong tubular steel construction adjustable control arms are the perfect upgrade to the factory stamped steel control arms. Including heavy wall DOM sleeves and collars, TIG welded 4140 Chromoly fine thread shanks, custom-designed Daystar brand PTMEG poly bushings, and pre-installed zerk fittings, these arms come completely ready to install - Just remove your factory arms and bolt these right in! Our heavy wall DOM sleeves are application specific, and guaranteed to perfectly fit your year model truck (year models have different sizes of hardware, requiring different inner diameter sleeves for optimal fitment). Cheaper rolled sleeves with a seem can split apart, due to stress from movement (see comparison images), shredding your bushings from within! These adjustable arms also feature 4140 Chromoly fine thread shanks! This material is SAFE TO WELD. While other manufacturers are content to use any old "all thread" material to make their shanks, we did the research to find the best, and SAFEST, material to use for our adjustable arms! Welding changes the composition of metal, and most "all thread" material is NOT considered safe to weld due to these compositional changes. Our shanks are machined, not cast/formed, so welding them is perfectly safe, while the fine thread allows for precise adjustability. Additionally, these shanks are TIG welded to our DOM collars for ultimate strength! Kit Contents: (2) Adjustable Lower Control Arms (2) Stryker Flag Decals (assembly required)(4) Zerk Fittings (assembly required) Fitment: 10-13 Dodge Ram 2500/3500 4WD Technical Notes: Does not fit 2013 Ram 3500 Dually models; Also fits all Mega Cab models; Re-uses factory hardware

Price: 199.95 USD

Location: Maryville, Tennessee

End Time: 2024-09-03T14:11:08.000Z

Shipping Cost: 0 USD

Product Images

1-6" Adjustable Lower Control Arms fits Dodge Ram 10 -13 2500 3500 Dodge Ram 4WD1-6" Adjustable Lower Control Arms fits Dodge Ram 10 -13 2500 3500 Dodge Ram 4WD1-6" Adjustable Lower Control Arms fits Dodge Ram 10 -13 2500 3500 Dodge Ram 4WD1-6" Adjustable Lower Control Arms fits Dodge Ram 10 -13 2500 3500 Dodge Ram 4WD1-6" Adjustable Lower Control Arms fits Dodge Ram 10 -13 2500 3500 Dodge Ram 4WD1-6" Adjustable Lower Control Arms fits Dodge Ram 10 -13 2500 3500 Dodge Ram 4WD1-6" Adjustable Lower Control Arms fits Dodge Ram 10 -13 2500 3500 Dodge Ram 4WD1-6" Adjustable Lower Control Arms fits Dodge Ram 10 -13 2500 3500 Dodge Ram 4WD1-6" Adjustable Lower Control Arms fits Dodge Ram 10 -13 2500 3500 Dodge Ram 4WD

Item Specifics

Restocking Fee: No

Return shipping will be paid by: Buyer

Returns Accepted: Returns Accepted

Item must be returned within: 14 Days

Refund will be given as: Money Back

OE Spec or Performance/Custom: Performance/Custom

Brand: Stryker Off Road Design

Kit Parts Included: Control Arm

Warranty: Lifetime Replacement - excludes powder coat

Included Hardware: Bushing

Greasable or Sealed: Greasable

Manufacturer Part Number: CRMDAJ0110DG25FLBE2

Lift Height: 1-6"

Surface Finish: black powder coat

Country/Region of Manufacture: United States

Adjustable: Yes

Placement on Vehicle: Front

Recommended

1-6" Adjustable Upper  Lower Control Arms fits Dodge Ram 2010-2013 2500/35004WD
1-6" Adjustable Upper Lower Control Arms fits Dodge Ram 2010-2013 2500/35004WD

$319.95

View Details
FOX 2.0 Reservoir V1 Dual Steering Stabilizer 2023 to 2024 Ford F450 F550 SD 4WD
FOX 2.0 Reservoir V1 Dual Steering Stabilizer 2023 to 2024 Ford F450 F550 SD 4WD

$939.00

View Details
Dual Steering Stabilizer with FOX L4 Shocks Ram 2013-2024 3500, 2014-2024 2500
Dual Steering Stabilizer with FOX L4 Shocks Ram 2013-2024 3500, 2014-2024 2500

$649.95

View Details
Bilstein V1 Dual Steering Stabilizer for 2008-2016 Ford F450 F550 Super Duty 4WD
Bilstein V1 Dual Steering Stabilizer for 2008-2016 Ford F450 F550 Super Duty 4WD

$499.95

View Details
Bilstein Dual Steering Stabilizer for 2017-2022 Ford F450/F550 Super Duty 4WD
Bilstein Dual Steering Stabilizer for 2017-2022 Ford F450/F550 Super Duty 4WD

$499.95

View Details
ICON FIELD ARMOR STRYKER KNEE CE IMPACT PROTECTOR ONE SIZE FITS MOST USED
ICON FIELD ARMOR STRYKER KNEE CE IMPACT PROTECTOR ONE SIZE FITS MOST USED

$39.00

View Details
Adjustable Control Arms 2000 - 2009 Dodge Ram 2500 3500 4WD for 1" to 6" Lift
Adjustable Control Arms 2000 - 2009 Dodge Ram 2500 3500 4WD for 1" to 6" Lift

$319.95

View Details